super sacks

    FIBC Types A, B, C, and D: Choosing a Static-Safe Super Sack

    U.S. Chemical Services / NBN Powder Packaging September 24, 2026 5 min read

    Why FIBC type matters

    Super sacks, or flexible intermediate bulk containers (FIBCs), all look roughly alike on a pallet. The difference that matters most is invisible: how the fabric handles static electricity. Filling and emptying a bulk bag moves a lot of powder against woven polypropylene very quickly, and that generates static charge. In the wrong conditions a discharge from the bag can ignite a combustible dust cloud or flammable vapors nearby. FIBCs are sorted into four types, A, B, C, and D, based on how they deal with that charge. The international standard that defines them is IEC 61340-4-4.

    Type A: no static protection

    Type A bags are made from plain woven polypropylene with no static-control features. They are fine for non-flammable products handled where no flammable vapors, gases, or combustible dust clouds are present. They should not be used to fill or empty flammable powders or in any area with a flammable atmosphere. Type A is the cheapest option, which is exactly why it sometimes ends up where it should not.

    Type B: limits the most dangerous discharge

    Type B bags use fabric with a low breakdown voltage, which prevents a particularly energetic spark called a propagating brush discharge. Type B can be used with many dry, combustible powders, but it does not get rid of static charge, and it is not suitable where flammable vapors or gases are present, for example around solvents. Under IEC 61340-4-4 it is limited to dusts that are not extremely easy to ignite, so the dust's minimum ignition energy matters when choosing it.

    Type C: conductive, must be grounded

    Type C bags, also called conductive or groundable FIBCs, have conductive threads woven through the fabric in a connected grid. During filling and discharge, the bag is connected to ground through a grounding tab, and the charge drains away safely. Type C is suitable for flammable powders and for use in flammable atmospheres, but only when properly grounded. An ungrounded Type C bag can be more dangerous than a Type A bag, because the conductive grid can store charge and release it all at once. Grounding has to be a step on the procedure, checked every time.

    Type D: dissipative, no grounding needed

    Type D bags use static-dissipative fabric that releases charge safely into the air through low-energy corona discharge, without a ground connection. They can be used with flammable powders and in many flammable atmospheres, which takes the human grounding step out of the process. The trade-off is a higher bag cost, and like the other types they need to stay clean and dry to perform as designed.

    FIBC types compared

    TypeStatic controlFlammable powdersFlammable vapors or gases nearbyGrounding
    ANoneNoNoNot applicable
    BLow breakdown voltage fabricMany, with limitsNoNot applicable
    CConductive threadsYesYes, if groundedRequired
    DStatic-dissipative fabricYesYes, within limitsNot required

    This is a summary. The final choice should come from the material's safety data, including its minimum ignition energy, and the conditions in the area where bags are filled and emptied.

    Liners change the picture

    Many chemical super sacks carry a polyethylene liner for moisture protection or product purity. A standard liner can defeat the static protection of a Type C or Type D bag, because the liner itself becomes an insulating surface. Static-sensitive materials need liners rated for the bag type they sit in, such as anti-static or conductive liners, and the bag and liner should be chosen together.

    Other FIBC specifications worth knowing

    • Safety factor: bags are rated for safe working load with a safety factor, typically 5:1 for single-trip bags and 6:1 for bags designed for reuse, as set out in ISO 21898.

    • Construction: U-panel, four-panel, and circular woven bodies, plus baffle bags that use internal panels to keep a square shape and stack and ship more efficiently.

    • Top and bottom: fill spouts, duffle tops, or open tops for filling, and discharge spouts or flat bottoms for emptying.

    • Food grade: bags made and certified for food contact, used for food and some pharmaceutical ingredients.

    For a general introduction to bulk bags, sizes, and safe lifting, see our super sacks explainer.

    Filling static-sensitive powders

    Choosing the right bag is half the job. The other half is filling it with grounding, dust collection, and handling practices that match. NBN Powder Packaging, the powder packaging side of U.S. Chemical Services, routinely fills anti-static and conductive packaging, including Type C and Type D super sacks, anti-static poly liners, and ESD-safe pails and drum liners. Share your SDS and packaging spec, and we will match the right format. Our repackaging service can also move material from bags or drums into the right FIBC type, or the other way around.

    Frequently asked questions

    What are the types of FIBC bags?

    FIBCs are classified as Type A, B, C, or D based on static protection. Type A has none, Type B prevents propagating brush discharges, Type C is conductive and must be grounded, and Type D is static dissipative and needs no grounding.

    What is the difference between Type C and Type D FIBC?

    Type C bags use conductive threads and must be connected to ground during filling and emptying. Type D bags use static-dissipative fabric that releases charge safely without grounding.

    Can Type A FIBC be used for flammable powders?

    No. Type A bags have no static protection and should not be used with flammable powders or in areas with flammable vapors, gases, or combustible dust clouds.

    What does 5:1 safety factor mean on a bulk bag?

    It means the bag is designed to hold five times its rated safe working load before failing in testing. Single-trip bags are typically rated 5:1 and reusable bags 6:1.

    Who can fill Type C or Type D super sacks in Ohio?

    NBN Powder Packaging, part of U.S. Chemical Services in Elyria, Ohio, routinely fills Type C and Type D FIBCs and anti-static liners. Call (440) 387-1829.

    Need help with your chemical processing project?

    Talk to our team today. Most projects start within 48 hours of receiving materials.

    Back to all articles
    Request a Quote