What hygroscopic means
A hygroscopic material pulls water vapor out of the surrounding air and holds onto it. Table salt that clumps in a humid kitchen is the everyday example. In industry the list is long: calcium chloride, magnesium chloride, sodium hydroxide, urea, many fertilizer salts, citric acid, sugars, some pigments, and a large share of specialty chemical powders.
Some hygroscopic materials go further and are called deliquescent. They absorb so much moisture that they dissolve in it and turn into a liquid or slush. Calcium chloride is the classic case, which is exactly why it works as a desiccant and as a road deicer.
Hygroscopic or hydroscopic?
Hygroscopic is the correct term for materials that absorb moisture from the air. Hydroscopic shows up constantly in spec sheets and emails, and most readers will know what you mean, but strictly speaking a hydroscope is an instrument for viewing objects underwater. In writing that goes to customers or regulators, use hygroscopic.
Why it matters for powder handling
Moisture uptake shows up in three ways that cost money.
Caking. Water forms liquid bridges between particles. When the material dries or cycles through temperature changes, those bridges harden into solid crystal bonds, and free-flowing powder becomes lumps or a single brick. We covered the mechanism in detail in why powders cake and clump.
Flow problems. Even before visible lumps appear, damp powder bridges in hoppers, rat-holes in silos, and feeds unevenly through screws and valves.
Off-spec product. Moisture content is a specification for many materials. Absorbed water adds weight that is not product, can start hydrolysis or other reactions, and can push a lot out of tolerance before anyone opens the bag.
Critical relative humidity
Many water-soluble salts have a critical relative humidity, the humidity level above which they start absorbing moisture from the air. Below it, the material stays dry. Above it, uptake can be fast. Published values for common fertilizer salts at 30°C put ammonium nitrate near 59% and urea near 73%, which explains why both are notorious in humid summer warehouses.
One point that catches people out: a blend of two salts often has a lower critical relative humidity than either salt alone. Two ingredients that store fine on their own can cake in the same warehouse once they are mixed. If you are planning a blend that includes hygroscopic components, factor that into packaging choices before the first batch ships.
Packaging hygroscopic powders
The packaging decision does most of the work, because once moisture is inside the package there is nowhere for it to go.
Liners. Multiwall paper bags with a polyethylene liner, or super sacks with a heat-sealed poly liner, are the standard first line of defense. An unlined woven bag lets humid air in with every temperature swing.
Heat sealing. A twisted and tied liner leaks more than people think. Heat-sealed closures hold up much better in long storage.
High-barrier films. Very sensitive materials may need foil laminate or metallized bags, which cut vapor transmission far below plain poly.
Desiccants. Desiccant packs or liners can absorb the moisture trapped in the headspace at packing time.
Package size. Smaller units mean less product exposed every time a customer opens one and uses only part of it.
Storage matters as much as the package. Temperature cycling, warm days and cool nights, draws humid air into imperfect seals and can condense moisture inside the package. A stable, dry warehouse buys a lot of shelf life.
Handling during repackaging
Every time a hygroscopic material is opened and transferred, it is exposed. Good practice during repackaging is simple and mostly about time: keep the exposure window short, reseal partial containers immediately, avoid transferring on the most humid days when there is a choice, and get the product into its final sealed package in one pass instead of several. Our chemical repackaging service is set up to move material from bulk to final package, including lined bags and super sacks, without extra stops in between.
When it has already caked
Caked hygroscopic product is usually still chemically good. It failed a physical test, and deagglomeration breaks the lumps back down to a free-flowing state, sometimes inside the original packaging. Before writing off a lot, read our guide on rescuing clumped powder or send us a sample.
Frequently asked questions
What does hygroscopic mean?
Hygroscopic describes a material that absorbs moisture from the surrounding air. Common examples include calcium chloride, sodium hydroxide, urea, sugar, and many salts and chemical powders.
What is the difference between hygroscopic and deliquescent?
A hygroscopic material absorbs moisture from the air. A deliquescent material absorbs so much that it dissolves into a liquid. All deliquescent materials are hygroscopic, but not all hygroscopic materials deliquesce.
Is it hygroscopic or hydroscopic?
Hygroscopic is the correct term for moisture-absorbing materials. Hydroscopic is a common misspelling; a hydroscope is an instrument for viewing objects underwater.
How do you store hygroscopic powders?
Store them in sealed, lined packaging such as poly-lined bags or super sacks with heat-sealed liners, in a dry warehouse with stable temperatures. Reseal partial containers right away and consider desiccants for sensitive materials.
Can caked hygroscopic powder be saved?
Often, yes. If the chemistry is unchanged, deagglomeration can return caked material to a free-flowing state. US Chemical Services in Elyria, Ohio handles this for chemical producers and distributors; call (440) 529-8868.
Need help with your chemical processing project?
Talk to our team today. Most projects start within 48 hours of receiving materials.

